This is a BRAND NEW 1.5 Ton, 208-230 Volt, 1-Phase, Direct Factory Replacement Bristol Compressor. The Bristol Model is H21J19BABCA. It is rated at 19,500 BTU. In some instances, small piping changes may be needed. Thanks for looking and good luck!
Capacity (BTU/HR): | 19500 |
Type: | Reciprocating |
---|---|
Refrigerant: | R-22 |
Input Voltage (V): | 208 |
Input Voltage (V): | 230 |
No. of Phases: | 1 |
Freq. (Hz.): | 60 |
Run Capacitor (uF/V): | 35/370 |
Start Capacitor (uF/V): | 145-175/300 |
Rated Load Current (A): | 8.0 |
Max. Continuous Current (A): | 15.5 |
Locked Rotor Current (A): | 54 |
Crankcase Heater Included?: | Yes |
Soundwrap (Brinmar): | 68-25217-10 |
Suction Line Location: | 2 |
Suction Line Height (in.): | 11-3/4 |
Suction Line Configuration: | Stub Out |
Suction Line Size (in.): | 3/4 |
Discharge Line Location: | 4 |
Discharge Line Height (in.): | 2-7/8 |
Discharge Line Configuration: | Stub Out |
Discharge Line Size (in.): | 1/2 |
Overall Compressor Height (in.): | 13-3/4 |
Mounting Base Dimensions (in. x in.): |
Compressors compress refrigerants (freon) from a gas state into a liquid state and then pump it through the freon lines.
51FT663301 51FT663300