Universal

This is a BRAND NEW Universal 190 degree 1 Pole snap disc limit switch (L190-40). The switch opens on rise (at 190 degrees) and closes when cooled (to 150 degrees). Replaces Supco part # SHL190. This...

This is a BRAND NEW Universal 150 degree 1 Pole snap disc limit switch (L150-20F). The switch opens on rise (at 150 degrees) and closes when cooled (to 130 degrees). Replaces Supco part # SHL150...

This is a BRAND NEW Universal 180 degree 1 Pole snap disc limit switch (L180-10). The switch opens on rise (at 180 degrees) and closes when cooled (to 170 degrees). Replaces Supco part # SHL180...

This is a BRAND NEW Universal 300 degree 1 Pole snap disc limit switch (L300-50). The switch opens on rise (at 300 degrees) and closes when cooled (to 250 degrees). Replaces Supco part # SHL300. This...

This quality aftermarket direct drive coupling is used in between the motor and the transmission on direct drive model Whirlpool/Kenmore washing machines. The coupling is the newly redesigned...

This is a Brand New Swaging tool set with 5 different sizes. This tool is used to flare the ends of tubing typically copper. The sizes are 1/4" 5/16" 3/8" 1/2" & 5/8". Thanks for looking and good...

This is for 3 Brand New-in-the-Box 24 volt Transformers. They are designed for universal application and accept 120/208/or 240 has a primary voltage. It's rated at 40VA. We use them for furnace and...

This is a BRAND NEW Universal Anti-Short Cycle Time Delay Relay. It is a Delay on Break relay which means that whenever the power is shut down the relay will time out before the relay will close...

This is a BRAND NEW-In-The-BOX Universal Relay with a 208-240 volt coil. It is a direct replacement for Carrier/Bryant/Payne Totaline relays with part # P283-0342. It has two completely independant...

This is a BRAND NEW Aftermarket Gas Furnace HSI (Hot Surface Ignitor). It is designed to replace Trane American Standard part #s IGN00023 IGN00054 & D340039P01. Simply unplug yours and plug this one...

This is a Brand New Microtemp Furnace Fuse. It is rated at 167 Deg C. Trane Part # is FUS00620 and it is rated at 167C. Plug and Play- Good luck!Function:A limit switch is a safety device designed to...

This is a BRAND NEW Cork Screw (Spiral) Gas Furnace HSI (Hot Surface Ignitor). Simply unplug yours and plug this one in! This Ignitor works on many American Standard/Trane gas furnaces. There are...